Silan is one of the best and top leading All-in-one Solar Street Light Manufacturers in India.
In the Past, people didn't want to choose street lights for three main reasons:
1. The light bulb uses energy
Both MH (metal halide) and HPS (high pressure sodium), which were used as light sources in street lamps at the time, exhibited LEDs when compared to relatively outdated lighting technology (60-80 lumens / W). These lamps / lamps typically consume a large amount of energy per day from the battery, which is considered a total drain on the battery capacity.
2. LED technology is newly developed and quite expensive
Although LEDs had been in the commercial outdoor lighting market for several years, the technology was not yet mature at that point. The lighting efficiency is only 100 lumens / watt (now, in 2019, it can be up to 200 lumens / watt). Also, because LEDs were only being developed at that time, they were quite expensive and the average person on the street couldn't afford them.
3. Lithium-ion battery technology is not well developed
The third reason is solar batteries. Lithium ion batteries have the longest life compared to deep cycle battery types, but they are unstable and will not function below 0 ° C. (Current operating temperature of three lithium batteries: -30 to 65 degrees Celsius)
However, over the years, things have changed.
Are new technologies being applied to All in one Solar Street Light?
The size of the battery and light source is getting smaller and smaller these days.
Thanks for technological breakthroughs in lithium-ion batteries and LED lighting. This development allowed the solar lighting industry to develop integrated solar street lights.
Battery: Compared with lead-acid batteries, lithium batteries are lighter, smaller, have longer service life and higher DoD. More importantly, lithium batteries have a larger capacity for the same volume.
Light source: Compared to MH / HPS lamps, LED takes up less space in the lamp
No Wiring and Easy Installation in Minutes: No complicated wiring process, even if you are an end user, no training or technical knowledge is required to install electrical equipment. All you have to do is fix the product with 12 fixing screws. Your family will always benefit from free solar energy.
60% less power consumption, which means more days of autonomy: The light source of most conventional street lamps is metal halide (MH) or high pressure sodium (HPS), whose light output is only 60-80 lumens per watt. Today, however, modern LED lighting technology has increased it dramatically to around 200 lumens per watt. People can achieve the same brightness at night using less energy than solar panels.
All in one solar street lighting with this type of light source easily realizes autonomy of more than 5 days, so you can work normally in places with rainy seasons or less sunlight.
Lower transportation costs benefit from the compact structure and all-in-one design: if you are a businessman, the compact design means a lot to your bottom line. The total amount of sunlight in a container could be two or even three times what it was before, and meanwhile, renting a warehouse could be a lot cheaper than before.
For further information please visit - https://solarlightandpump.com/product-category/all-in-one-solar-street-light/